LED ramp 980mm, orange, 12/24V, ECE R65

LED ramp 980mm, orange, 12/24V, ECE R65

star 1star 2star 3star 4star 5 (1) Rating value is 5 of 5

PRC
Product code: KA0013
342 Eur incl. VAT
Expedition 5-7 days. (0 pcs) - Expedition time 5-7 working days!!
PRC
Product code: KA0013

Orange LED light ramp suitable for all types of vehicles. It is designed for vehicles where special emphasis is placed on the warning effect. The LED modules used are clearly visible even in good lighting conditions.

Technical parameters:

- supply voltage 12/24 V

- light source: LED

- 6 variants of warning flash modes

- ECE approval R65, R10

- dimensions: mm 980*327*43/81 with handles

- waterproof IP67

- working temperature -40 ºC - +65 ºC

- designed for fixed mounting

- power cable 4 m

Color Orange
Certification ECE R10 covers the approval of vehicles and electrical/electronic equipment with regard to electromagnetic compatibility (EMC). It sets requirements so in-vehicle devices limit electromagnetic emissions and have adequate immunity to interference. EHK R65 TA1 denotes a Category T (360°) beacon, A = amber, in Class 1 (one standard intensity level).
Protection rating The product is dust-tight (no dust ingress) and resistant to temporary immersion (short-term immersion; typically up to 1 m for a limited time).
Voltage 12/24V
Connection type Connection using loose wires. Suitable for connection via your own switches or connection to assemblies.
Mounting type Screw mount – a stable installation using screws (typically through a base plate or mounting holes). Best where the beacon is intended to stay permanently installed.
Length 980 mm
Height 81 mm
Lightbar height without carriers 43 mm
Light intensity levels 1 level TA1
Width 327 mm
Before using the device, carefully read the instructions and follow the warnings, safety information, and recommendations to prevent injury or damage. If possible, test the product and its functionality before installation. Perform the installation with the power disconnected and observe the correct polarity. Check the correct voltage (12/24 V) and use the appropriate fuse. Do not use damaged cables, connectors, or devices. Ensure that the cables are securely fastened and routed away from sharp edges and hot parts of the engine. The lights can be very intense and hot: do not look directly into the light source and do not touch it immediately after operation. Keep out of reach of children and protect from water unless the product is specifically designed for outdoor use. When using on public roads, familiarize yourself with and comply with local regulations. Use the product only for its intended purpose.
Manufacturer's representative in the EU STUALARM IMPORT, s.r.o
Address of representative in the EU Na Křivce 1082/30, 10100 Praha 10 - Vršovice
EU representative email info@stualarm.cz
%s ...
%s
%image %title %code %s
%s