Blind Spot Detect (BLIS) or Blind Spot Detect (BSD) helps monitor the blind spot area of a passenger vehicle using 2 79GHz microwave sensors
and detects if any moving object enters the blind spot area and alerts the driver with 2 LED indicators and 1 buzzer to avoid any collision.
The system warns of cars or motorcycles that are in the blind spot, then you can't see them in the mirror.
For example, if you miss a car or motorcycle on the motorway and start to overtake the car in front of you, a high-speed collision will occur.
Technical parameters
- Supply voltage: 9-36 V
- Detection distance: 0.3-30 m / 3 m width
- Detection principle: ISM 79GHz
System functions
- During driving, the 79GHz microwave sensors monitor the blind spot all the time. If there are objects approaching within the detection range, the LED indicator will trigger a signal. The left LED indicates an object in the area monitored by the left sensor,
the right LED indicates an object in the right area monitored by the right sensor. The detection range is 0.3 to 30 meters with an angle of 120 degrees.
- Anti-collision lane change warning: If the system detects any moving object entering the detection zone while driving, the LED indicator on the same side of the detection zone will light up;
If you turn on the turn signals on the same side at this time, a buzzer will sound to warn the driver that it is dangerous to change lanes. The LED indicator will flash.
- Anti-collision warning before opening the door
- Reversing collision warning, cross traffic (RCTA). If the system detects any moving object entering the detection zone during reversing, the LED indicator will flash and the buzzer will sound,
until the target has left the alarm area, the warning will be cancelled.
Part of the package
- The 2 sensors of the system are placed in the space under the rear bumper
- extension cables
- control unit
- 2x signal light
- buzzer
- power cabling
- sensor holders